PETRONAS Arbor Protective Fluid Antifreeze Lubricant

PETRONAS Arbor Protective Fluid

For Tireless Machinery, The Best Fluid Technology for Your Daily Work

Agricultural and construction machinery is the lifeblood of your business. Ensuring that they are always working tirelessly and efficiently is the Number One priority. Machinery requires the best fluid technology to perform longer, especially when operating under severe conditions.


PETRONAS Arbor Protective Fluid is a concentrated protective antifreeze and coolant fluid for the engines of tractors, farm machines and earthmoving machinery.

PETRONAS Arbor Protective Fluid, based on ethylene glycol, properly diluted provides the utmost performance in terms of antifreeze protection and cooling.

PETRONAS Arbor Protective Fluid removes the heat generated by combustion and ensures protection against freezing down to temperatures of -38°C if mixed at 50% with water.


PETRONAS Arbor Protective Fluid enhances your vehicle availability while significantly reducing your operating costs through:

  • Extended Cooling System Life driven by:
    • Enhanced corrosion protection to protect metal-based components
    • Protection against freezing when outside temperature is down to -38°C (-36°F) at 50% with water
    • Protection against boiling in case of circuit temperature up to 110°C (230°F) at 50% with water
    • Good elastomer and plastic compatibility for a longer component’s life



  • ASTM D 6210 Type 1-FF
  • NH 900 B
  • MS-1710
  • MAT 3620

Note: Always consult your owner’s manual to check recommended viscosity grade and specifications for your specific vehicle


Parameters Method Unit Typical Value
Color - - Red
Relative Density @15°C ASTM D 1122 g/cm3 1.135
pH, 50% vol in DI water ASTM D 1287 - 7,6
Reserve alkalinity ASTM D 1121 ml 17
Boiling point, 50% vol in DI water ASTM D 1120 °C 108
Freezing point, 50% vol in DI water ASTM D 1177 °C -38
Glassware corrosion test ASTM D1384 - PASS

All technical data is provided for reference only. These characteristics are typical of current production. Whilst future production will conform to PLI’s specification, variations in these characteristics may occur.



This product is unlikely to present any significant health and safety hazards when used in the recommended application. Avoid contact with skin. Wash immediately with soap and water after skin contact. Do not discharge into drains, soil or water.